Installing Zabbix 2.2.1 on Centos 6

After using Zabbix for monitoring the network for awhile I figured I would post a couple things to help others out.
I have found a script developed by http://blog.brendon.com that made the install quick and easy.
Zabbix already has good documentation to setting up their production so I will link to their articles at the end.

Install Centos

You will need to setup a machine in a Virtual environment or in a physical computer.

Install the updates on the new setup. (yum updates)
Here is a link to another how-to on install centos minimal and webmin (it is basically how I did my install)
http://community.spiceworks.com/how_to/show/57482-centos-minimal-install

Dwnload Install Script

When I first tried setting up Zabbix I kept hitting road blocks and well I am always one for a quicker easier way to setup systems.
I found this script that would take care of the hard stuff and make the install easier and quicker.
http://blog.brendon.com/general/installing-zabbix-2-2-x-on-centos-the-easy-way/trackback/
I also attached the script to this how to.

Setup Zabbix

Once that is all installed open a web browser to the server IP or DNS name.
http://localhost/zabbix
http://127.0.0.1/zabbix
Adding New User - https://www.zabbix.com/documentation/2.2/manual/quickstart/login
Adding Host - https://www.zabbix.com/documentation/2.2/manual/quickstart/host

Receiving Notificaitons

https://www.zabbix.com/documentation/2.2/manual/quickstart/notification

Nhận xét

Đăng nhận xét

Bài đăng phổ biến từ blog này

CLEANING UP THE ZABBIX DATABASE

My Zabbix database size increased a lot in the last few months and since my disk was running out space, I decided to clean up the old events from the database. Looking at the database tables, the biggest one was  history_uint , which holds the items history data – over 400 millions of records and over 30 Gb of disk space before the clean up. Since deleting the old records from this table directly would be a very slow process, I decided to create a new table and insert the latest records from the  history_uint  table and then just replace the old table with a new one. Since this is not an offical procedure, use it at your own risk. Environment: Zabbix v2.2 MySql 5.1 – InnoDB with  innodb_file_per_table=ON Step 1 – Stop the Zabbix server Step 2 – Open your favourite MySQL client and create a new table CREATE TABLE  history_uint_new  LIKE  history_uint; Step 3 – Insert the latest records from the  history_uint  table to the  history_uint_new table First you need to de
Đọc thêm

Configuring DHCP Relay service on the FortiGate unit

Configuring DHCP Relay service on the FortiGate unit If the clients are configured to obtain a IP address using DHCP relay, configure the FortiGate server as below: To configure DHCP relay on the FortiGate unit   1. Go to System > Network > Interfaces and select Interface want to configure DHCP relay.   2. Enable DHCP Server in the interface and choose Advanced   3. For Mode, select Relay.   4. In Type select Regular.   5. Select OK.   6. If a router is installed between the FortiGate unit and the DHCP server, define a static route to the DHCP server. Note : Sometimes it is required to specify more than one DHCP relay IP, to allow for the coverage of additional LAN subnets. Although the Web Based Manager (GUI) does not provide an option to configure this, it is possible to set up to 8 IPs from the CLI.       config system interface             edit <REQUIRED_INTERFACE_HERE>               set dhcp-relay-ip <FIRST_IP> <SECOND_IP> ....<EIGHTH_IP&
Đọc thêm

WAN link load balancing

Hình ảnh
W A N link load balancing In the same way that incoming traffic can be load balanced, outgoing or WAN traffic can also be load balanced and for the same three reasons. 1 .  Reduce the places in the work flow where a single point of failure can bring the process to a halt. 2 .  Expand the capacity of the resources to handle the required workload. 3 .  Have it configured so that the process of balancing the workload is automatic. Often, it can be just as important for an organizations members to be able to access the Internet as it is for the denizens of the Internet to access the Web facing resources. There is now a  WA N Load Balancing  feature located in the  N e t w o r k  section of the GUI (“WAN LLB”). As part of the new WAN Load Balancing feature, the FortiOS 5.2  R ou t e r > Static > Settings  GUI page has been removed. WAN Load Balancing should be used instead of the 5.2  E C M P Load Balancing Method  settings. The 5.2  L i n k Health Monitor  definitions
Đọc thêm