[P]Delete

W A N link load balancing In the same way that incoming traffic can be load balanced, outgoing or WAN traffic can also be load balanced and for the same three reasons. 1 .  Reduce the places in the work flow where a single point of failure can bring the process to a halt. 2 .  Expand the capacity of the resources to handle the required workload. 3 .  Have it configured so that the process of balancing the workload is automatic. Often, it can be just as important for an organizations members to be able to access the Internet as it is for the denizens of the Internet to access the Web facing resources. There is now a  WA N Load Balancing  feature located in the  N e t w o r k  section of the GUI (“WAN LLB”). As part of the new WAN Load Balancing feature, the FortiOS 5.2  R ou t e r > Static > Settings  GUI page has been removed. WAN Load Balancing should be used instead of the 5.2  E C M P Load Balancing Method  s...

Configuring DHCP Relay service on the FortiGate unit If the clients are configured to obtain a IP address using DHCP relay, configure the FortiGate server as below: To configure DHCP relay on the FortiGate unit   1. Go to System > Network > Interfaces and select Interface want to configure DHCP relay.   2. Enable DHCP Server in the interface and choose Advanced   3. For Mode, select Relay.   4. In Type select Regular.   5. Select OK.   6. If a router is installed between the FortiGate unit and the DHCP server, define a static route to the DHCP server. Note : Sometimes it is required to specify more than one DHCP relay IP, to allow for the coverage of additional LAN subnets. Although the Web Based Manager (GUI) does not provide an option to configure this, it is possible to set up to 8 IPs from the CLI.       config system interface             edit <REQUIRED_INTERFACE_HERE>   ...